| | | | | | | |

My 9 Step Version of the Design Thinking Process

My 9 Step Version of the Design Thinking Process

This post about my 9-step version of the design thinking process has been long overdue. It is already explained in my book, ‘Design the Future’, but I also wanted to share it here for those interested.

The five-step Stanford design thinking process is arguably the most popular process out there. I have however, come across numerous different processes or versions. Ranging from the 15-step Darden process that I was taught, to oversimplifications and misleading three-step processes I have come across.

In my interactions with managers, business leaders and even students, I found that while many were familiar with the Stanford or some other design thinking process, they did not quite understand it well enough. For instance, ‘empathy’ came across to them as something that is ‘just done’. Similar to how many people assume hearing is the same as listening. And seeing empathy as a step in the process gave many the impression that like a switch, it had to be turned on and then off, as one moved to the next step.

So, in an effort to simplify the design thinking process so more people may use it, I created my own version of the design thinking process based on my understanding of design thinking and experiences practicing it. I took the Stanford model, and hopefully improved it.

You need to remember that any design thinking process is a broad guideline. It is not like a military obstacle course that one must complete in a defined sequence. You might find yourself looping through a few steps multiple times. Or in some cases, depending on what the information or insight presents, you might find yourself back at the beginning; starting again with renewed understanding of the challenge.

Sherlock Holmes, in the series ‘Elementary,’ once tells Watson, “The danger with rule books, Watson, is that they offer the illusion that leading a moral life is a simple undertaking, that the world exists in black and white. Welcome to the grays.”

At least when it comes to areas such as creativity and drawing inspiration, remember there can never be stringent rules or guidelines.

My 9-step version of the design thinking process:

My 9 Step version of the Design Thinking Process

Of the nine steps in the process, the first three are more underlying criteria than steps. Criteria that are critical to improving the chances of success on a project. Those three criteria are Humility, Empathy, and Intention. While these might seem obvious to the point of sounding stupid, they are often the most ignored aspects to a design-led process. More on that as we understand each step better.

After that come the more common steps of most design thinking processes. They are: Define – Empathize with Intent – Redefine – Ideate – Prototype – Test

Let’s look at the nine steps more closely:

Humility – The quality of having a modest or low view of one’s importance. Its relevance springs from the simple signal versus noise perspective. Our objectives as design thinkers is to maximize our understanding of user experiences and needs. Of those we want to innovate for, or whose problems or challenges we want to solve. That is the signal that is of utmost importance to us for innovating for them. Our views, opinions, and biases are the noise.

The moment you can bring yourself down to the level of a beginner or a learner, you put yourself in the backseat, and that’s when the end user or final beneficiary of your innovation will come into the limelight of your focus. Remember to start with humility.

Empathy – The ability to understand and share the feelings of another. Putting yourself in a live user-setting and observing and/ or interacting with users to get a better sense of what a problem or future opportunity might mean to them, how they deal with it, and so on. In conjunction with humility, it offers a good environment to capture user information.

Unlike what some methods might state, empathy (and humility as well as the next step, intention) are not steps in themselves. They should not be traits that you turn on and off depending on which stage of the design thinking process you are. It is also why, along with the intent, I have placed them at the base of the six-step process, to signify how the three traits always need to be ‘ON.’

Without being in a constant state of empathy, no real innovation is possible. And that will be the difference between a real design thinker or team creating an exceptional change, and people simply practicing it as a flavour of the times.

Intention – An intention is the larger thought and nudge to action for a change, that brings you to employ the design thinking process. You might wonder what the difference is, between humility, empathy, and intent.

As a business leader, humility will always help you spot customer or employee or other stakeholder needs and concerns. Empathy will let you better understand those needs and concerns. To get to the root causes of it. You might still choose not to do anything about it, because you don’t have the intention to. Contrarily, if you have the intention, but lack humility and empathy, it would mean that your objective or goal is not the right one.

Equipped with humility and empathy, but in the absence of any intent, a business leader will always spot improvement areas in his or her business. All they need then is to choose their intention – i.e., determine the direction of their effort, and get working on it.

Define – Here, we put the problem statement or opportunity statement in words. It is a starting point of sorts, to the primary design thinking process. Before interacting with user groups, this is a step where we broadly express what we think the problem or opportunity area might be. It could be how a client has described a problem, or, if we are helping a friend or industry colleague, it could be their description of the issue.

One key thing to remember with defining a problem or opportunity is to make it sound positive, irrespective of how grave or pointless the situation might seem. A lot of companies are prone to defining/ framing what hurts first. Their definition ends up being a problem statement which sounds grim. The disadvantage of doing this is that when you invite people to think of ideas, even as part of a brainstorming exercise, a grim-sounding problem statement stifles the thinking, and will hugely limit the number and quality of views that you receive.

On the contrary, if you turn your problem statement into an opportunity statement, people ideating will be in a positive mindset, and be more attuned to think of creative ideas. Try to notice the difference of mindsets the following two statements evoke. Read them more than once if necessary:

A Problem Statement: “How can we drastically reduce our after-sales service related expenses?”

An Opportunity Statement: “How can we redefine our service arm to be more relevant to customer needs, while not proving expensive for us?”

As Abraham Maslow once said, “if all you have is a hammer, everything looks like a nail.” Defining a challenge too negatively and very precisely might give you solutions that just create more problems of their own.

Empathize with intent – This is the fun phase, where you spend time observing actual users in their natural surroundings. See how they consume a product or service. How they interact. And you must do this in the subtlest way possible, even when you are interviewing or interacting with them. Especially if the process is delicate or embarrassing for the end-user, or if the user is introverted or are in some way intimidated by you and your team’s presence.

One important thing to remember in this phase is to be subjective with the empathy, but objective with what they share with you. If you have a subjective mindset when trying to find learnings, you might tend to get lost in a problem. And depending on the type of assignment, it might leave you either in disbelief, or maybe even depressed or an emotional wreck, depending on the kind of problem you are working to solve, as users expose you to severe difficulties or bitter experiences.

Instead, empathize with users as they walk you through their journey, experiences, feelings, and thoughts. But look at it from behind a glass wall when taking notes or drawing inspiration or conclusions from it. That way, your focus is not diverted by problems but instead stays focused on noting down those problems and possible thoughts, reasons, etc., that might spring to mind. The focus will help you then work towards getting rid of the problem, as opposed to being overwhelmed by it.

Redefine – After gathering user insights, we revisit our original definition with what we have learned. After enough information has been collected in the earlier stage, the team debriefs. The information is shared amongst team members without contaminating it with their inferences. That way, each member gets a clear sense of how things presently are.

Often, when tasked with solving a problem for someone, even when we have little or no information to go with, we are eager to get started with identifying potential solutions right-away. You might have seen this tendency in yourself and others (I tend to, from time to time), where someone mentions a problem, and without stopping to understand more, you start rattling possible causes or solutions.

That happens when we go with our definition of someone else’s problem. Which is why, after an initial definition, once we get a better understanding of it from actual people facing the problem (in the ’empathize with intent’ stage), we redefine the challenge more accurately, based on what we have learnt.

Ideate – This is the stage where designers would take the information they have gathered and use it as inputs that they put through a choice of design thinking tools. Tools including the brainstorming or versions of it, to contra-logic, worst-idea, brain-writing, trigger questions, changing perspectives, etc., and then use anchors, forced combinations and connections to come up with numerous ideas. The more ideas, the better, and the crazier the ideas; even better!

Prototype – Prototyping an innovative solution is akin to shaping a solution using two pairs of hands – your design team’s, and your users’. In the previous stage, you would have identified some potential ideas and possible directions regarding a solution. This is where you need end users to help you figure out what works for them, and what does not.

The objective of this stage is to be able to move rapidly towards a final solution, with minimum investment (as far as possible) on experiments towards refining potential solutions. The moment each prototype becomes too expensive and complicated, there is a tendency to either convince yourself and your team that it is a great solution (because of the effort that went into it. It is a cognitive bias called the IKEA effect).

Another possibility is that if you encounter a roadblock at this stage, your team or the top management might get easily demotivated and consider it a colossal failure, solely because your team spent a fortune building a prototype that user groups did not like or approve of.

Instead, make the most basic and low-cost but effective prototypes possible. Use anything from sheets of paper for story-boarding, to card paper or cardboard, Styrofoam and other craft supplies to work toward a final solution. Your objective with each prototype, is to test no more than one factor or variable you need clarity on. Test too many criteria, and the learning becomes unclear.

At workshops I conduct, I sometimes take my old letterheads for participants to use for discussions, sketching, or to make things out of.

It is only when everyone finds using anything lying around them as potential material for prototypes, is when prototyping will become far more prevalent. The same goes for ideating. If the materials you use are too fancy, you or your team might use it as an excuse to delay prototyping, or even ideating.

Which is also why, while a lot of design thinking workshops use post-its and put up pictures of it, few participants continue to use post-its to implement some of the tools they learnt. Because buying post-its is expensive and sometimes inconvenient. If you can’t make do with stuff already at your desk or around, the action gets delayed till you buy those supplies. Take this from someone who uses toothpaste or soap to write on the bathroom wall so that a potential idea does not disappear with the flowing water.

Test – Once you’ve completed the prototyping phase, you move on to testing. The significant difference between the two is that while prototyping was far greyer and also, the prototypes were far less expensive but required a slight stretch of the imagination by the user, the testing phase is that much more advanced, as it is that very close to the final product or service.

And unlike checking one feature at a time in the prototyping phase, here you are testing the product or service in its entirety, towards ironing out any features or poor service extensions that exist, by letting your users directly interact with the solution.

The first rule to keep in mind in the testing phase too is that your product or service is not final or finalized yet! There would still be some assumptions that your team would need to test. For instance, it is one thing to prototype with sketches or storyboards or even pretend mobile interfaces. Quite another to have end users interact with your store layout or theme park or mobile application.

Which is why we have the testing phase, where your team would help build almost-final solutions to test them in the hands of a closed group of stakeholders. It is great to have a select list of people who will evaluate your creation. That increases the focus and feedback capturing. And what you will be testing, are any assumptions that were earlier not tested, or that sprung up along the way with the increase in clarity.

It isn’t possible to overstate the amount of valuable, even critical insights that can be gained in the testing phase.

Testing is followed by eventually launching the product, service or change – once all assumptions and user hesitations have been factored in.

After you’ve gained more realistic insights from real users who interacted with your prototypes and brought you very close to a final solution that you by way of prototypes and then running exercises with them in the testing phase, you are finally onto an almost ready and well-refined answer.

Ideally, even after launch, the journey should be looked at like it is the making of a TV series. You’ve launched season 1 or 2, and it is doing well. But you need to check-in now and then as to how viewers are reacting and engaging with it. The bigger question in your mind always is, is there enough traction to demand a season 3, and if yes, would there be any significant changes needed (replacing actors, etc.) or is the show no longer relevant to its audiences. In which case, you then need to figure out what next. That way you are not going in blind with season 3, to later find out it lost its audience midway through the previous season itself.

One should remember that there is no perfect product, service, experience or solution to user needs or problems. And there are no runaway results promised by design thinking, the way some firms guarantee the ability to create viral videos. But yes, you always have a far greater chance of arriving at a product or service that people want or need by using design thinking, than by merely guessing or troubleshooting your way through.

Similar Posts

Leave a Reply